Errors description:
• Flight task cannot be performed — change a flight task.
• Battery is not fully charged — The flight may be performed, but be aware that
the battery capacity may not be enough for a full-time flight. A fully charged battery
can provide up to 40 minutes of flight time. Calculated flight time you can see on
an aerial survey calculation bar at the bottom right corner.
Aerial survey calculation bar
• Compass error — Calibrate the UAV magnetic compass. See Magnetic Compass
Calibration section for details.
• Camera error — check the camera connector is plugged correctly. Contact our
technical support if it doesn’t help.
• Low light image — check the lens cap, light conditions and press Repeat button
after that.
• No SD card — flight can be performed without SD card. In this case, internal
memory synchronization with SD card will not be available after flight.
• Not enough internal memory — clear the UAV memory by pressing the Clear
memory button or by USB Type-C connection.
43
To Next Page
Loading...
