GV-AS400 Controller
115
3
3.5.2 Operation
GV-ASKeypad allows you to configure basic settings and view system information. Press the
following codes on the keypad to start operating.
Code Function
＊738 Sets parameters.
＊347 Displays system information
＊837 Tests numeral keys to see if they can be displayed properly.
＊737 Restores the Advanced Settings of GV-AS400 to factory defaults.
Note: Press to display the symbol ＊
3.5.2.A Setting Parameters
Through GV-ASKeypad, you can program GV-AS400.
IMPORTANT: Once connecting to GV-AS400, GV-ASManager will load its parameters to
GV-AS400. That means some of configurations you have configured may be overwritten by
GV-ASManager later.
1. Press the code ＊738.
2. Press the default PIN code 1234.
3. To set parameters:
• Use the Up and Down arrow buttons to select options, or change doors for settings.
• Press to start setting, or apply settings.
• Press to return to the home page.
Option Function
Set Local Time Sets the time and specify the time zone of GV-AS400.
Set AS400 ID
Sets the ID of GV-AS400 from 1 to 255.
Set Auth. Mode Sets an authentication mode for each door. For types of
authentication modes, see 3.4 Web-Based Configurations.
Press the Right and Left arrow buttons to change modes.
To Next Page
Loading...
Need help?
General
