GV-AS100 Controller
9
1
1.2.5 Connecting the Power
The supplied AC adaptor can be connected to any power source supplying from 100 to 240V.
Using the supplied power cord and adaptor, connect GV-AS100 to the power.
Note: Power should only be applied to the unit when all connections are completed and
tested.
1.2.6 Fitting the Battery
GV-AS100 includes a 3V lithium battery, providing power to database and real-time clock
circuitry. When the power in the battery becomes low, the message “Low Battery” will
appear on GV-AS100 LCD. In this case, please replace the battery. The database on GV-
AS100 will remain about 10 hours after the battery stops working.
Figure 1-8
To Next Page
Loading...
Need help?
General
