GV-AS100 Controller
29
1
1.4.5.B.a Function Setting
In the left menu, click Function Setting. This AS100 Function Configuration page
appears.
Figure 1-17
[ID]
Enter the ID number for GV-AS100. This ID is used by GV-ASManager to differentiate
among multiple units of GV-AS100. ID number can only be between 1 and 255.
[ASBox Wiegand]
Select the function for Wiegand Input on GV-ASBox from the drop-down list.
No Function: Wiegand Input is not in use.
Door/Gate A Entry: Wiegand Input becomes the entry point for Door/Gate A.
Door/Gate A Exit: Wiegand Input becomes the exit point for Door/Gate A.
Door/Gate B: Wiegand Input becomes Door/Gate B.
To Next Page
Loading...
Need help?
General
