64
CHAPTER 7
Maintenance
Chapter 7:
Maintenance
This section covers cleaning, routine maintenance, and fuse replacement.
Cleaning
Routine cleaning should be done weekly or after every 80 hours of use,
whichever occurs first. Use a clean, lint-free cloth and 97% or greater
isopropyl alcohol to clean dust and debris.
Grit wheels
Each day, before turning on power to the ODYSSEY XP and loading
material, clean the grit wheels. The amount of cleaning needed depends
on the types of jobs and materials run. Typical cleaning should take only
a few minutes per day.
♦
Use the provided brush to clean the grit wheels. If this brush is not
available, use any nylon or brass bristle brush (for example, a
toothbrush).
♦
Failure to keep grit wheels clean can result in poor tracking control
and material slippage.
To Next Page
Loading...
