3
Tip: A tip is a hint to help you do something more efficiently or quickly.
This typestyle
portrays messages that appear on either the ODYSSEY XP
message display or your computer monitor.
A dotted box
around
Start-Job
is used to indicate a blinking
display.
Safety
WARNING: Unplug the power cord before performing any
maintenance. Voltage is present inside the system even after the power
switch is turned off. All voltage is removed only when the power cord
is unplugged.
CAUTION: Static electricity may damage electronic components.
Ground yourself by touching any bare metal inside the plotter frame
prior to handling electronic components.
Customer support
If you require assistance, please contact your Gerber distributor or
contact the Gerber Field Service Department at:
800-828-5406 (USA and Canada)
860-643-1515 (International)
860-648-8376 (fax)
e-mail: gsptech@gspinc.com
www.gspinc.com
To Next Page
Loading...
