5
Performing the Initial Startup
When turning on your device for the very first time, you will be guided
through a setup process.
1. Make sure that your device is either connected to AC power or the
battery has power.
2. Press the power button.
The device powers up and displays the initial screen.
3. Select Models Only: If a SIM card has been inserted and the mobile
phone network operator (or you) has set the PIN, you will be prompted
to enter the PIN. Touch OK after entering the PIN.
4. Follow the on-screen instructions to complete the initial setup process.
5. After the setup is completed, the Home screen appears. You can now use
your device.
To Next Page
Loading...
Need help?
General
