3
Connecting to AC Power
It is suggested that you use AC power when starting up the device for the
very first time.
1. Plug the DC cord of the AC adapter to the power connector of the device
(
).
2. Plug the female end of the AC power cord to the AC adapter and the
male end to an electrical outlet (
).
3. Power is being supplied from the electrical outlet to the AC adapter and
onto your device. Now, you are ready to turn on the device.
CAUTION: Use only the AC adapter included with your device. Using other
AC adapters may damage the device.
NOTE: When the AC adapter is connected, it also charges the battery pack.
For information on using battery power, see “Managing Power” in Chapter
6.
To Next Page
Loading...
