30
Scanning Barcodes
1. Touch Barcode Utility in the All Apps screen.
2. To scan one barcode at a time, touch Trigger. Alternatively, you can press
P2 button on your device.
To scan continuously, touch Continuous.
3. Aim the green scan beam so that it is centered over the barcode. Adjust
the lens’ distance from the barcode, shorter for a smaller barcode and
farther for a larger one.
NOTE: If the code being scanned is highly reflective (e.g., laminated), it may
be necessary to tilt the code +5° to prevent unwanted reflection.
To Next Page
Loading...
Need help?
General
