Gigabyte GA-Z87N-WIFI User Manual

- 39 -
BIOS Setup
& System Memory Multiplier
Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD
data.(Default:Auto)
& Memory Frequency (MHz)
 Therstmemoryfrequencyvalueisthenormaloperatingfrequencyofthememorybeingused;thesecond
is the memory frequency that is automatically adjusted according to the System Memory Multiplier settings.
` Advanced Memory Settings
& ExtremeMemoryProle(X.M.P.)
(Note)
, System Memory Multiplier, Memory
Frequency(MHz)
The settings above are synchronous to those under the same items on the Advanced Frequency Settings
menu.
& Memory Upgrade
(Note)
 Allowsyoutosetthememoryfrequency.Optionsmayvarydependingonthememorybeingused.(Default:
Auto)
& Performance Enhance
Allows the system to operate at three different performance levels.
Normal Lets the system operate at its basic performance level.
Turbo   Letsthesystemoperateatitsgoodperformancelevel.(Default)
Extreme Lets the system operate at its best performance level.
& DRAM Timing Selectable
Quick and Expert allows the Channel Interleaving,Rank Interleaving,andmemorytimingsettingsbelow
tobecongurable.Optionsare:Auto(default),Quick,Expert.
& ProleDDRVoltage
 Whenusinganon-XMPmemorymoduleorExtremeMemoryProle(X.M.P.) is set to Disabled,thisitem
will display as 1.50V. When ExtremeMemoryProle(X.M.P.) is set to Prole1 or Prole2,thisitemwill
displaythevaluebasedontheSPDdataontheXMPmemory.
(Note) ThisitemispresentonlywhenyouinstallaCPUandamemorymodulethatsupportthisfeature.

Gigabyte GA-Z87N-WIFI Specifications

General

Brand	Gigabyte
Model	GA-Z87N-WIFI
Category	Motherboard
Language	English