EasyManua.ls Logo

GMC 1998 Yukon - Interior Lamps; Instrument Panel Intensity Control; Illuminated Entry; Dome Lamps

GMC 1998 Yukon
444 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
When
it
begins to get dark, your
DRL
indicator light is a
reminder to
turn
your headlamp switch on. The other
lamps that come on with your headlamps will
also
come
on.
When you turn the headlamp switch
off,
the regular
lamps will go
off,
and your headlamps will change to
the reduced brightness
of
DRL.
To
idle your vehicle with the
DRL
off, set the parking
brake.
The
DRL will stay off
until
you release the
parking brake.
As
with any vehicle,
you
should turn on the regular
headlamp system when you need it.
Interior
Lamps
Instrument Panel Intensity Control
The instrument panel intensity control is located next to
the parkingheadlamp switch. Rotate the thumb wheel up
to adjust the instrument panel lights. Rotate the thumb
wheel
up
to
the
first notch to
return
the radio display and
gear shift indicator
LED display to
full
intensity when the
headlamps or parking lamps
are
on.
To
turn on the dome
lamps (with the vehicle doors closed) rotate the thumb
wheel
up
to the second notch position.
Illuminated Entry
Your vehicle
is
equipped with an illuminated
entry feature.
When the doors are opened, the dome lamps will come
on
if
the dome lamp button is
in
the out position. When
all doors are closed
or
the dome lamp button is pressed
in,
the lamps will stay on
for
a
short period of time and
will
then
go
out.
Dome
Lamps
The dome lamps will come
on
when you open the doors
You can also
turn
the dome lamps on by rotating the
thumb wheel, located next to the parking/headlamps
switch knob, all the way
up
to the second notch. In this
position, the dome lamps
will
remain on whether the
doors are opened or closed.
2-42

Table of Contents

Related product manuals