Roof
Marker Lamps
1.
Remove
the
screws and
lift
off the lens.
2.
PLIH
the bulb straight out
of
the socket.
3.
Put a new bulb into the socket and push it
in
until
it
is tight.
4.
Replace the lens and tighten the screws.
Rear
Lamps
1.
Open the tailgate
or
rear doors.
2.
Remove the two black plastic plugs from the rear
lamp assembly access holes.
4.
Remove the screws from
the bulb retainer and
take the bulb retainer
off
of
the lamp assembly.
5.
Pull
the old bulb straight out
of
the socket.
6.
Put
in
a new bulb and
push
it
straight
in
until
it
is
tight.
7.
Replace the bulb retainer.
8. Replace the rear lamp assembly and tighten the
screws.
You
may want to use a magnetic screwdriver
when installing the screws.
9.
Close the tailgate or rear
doors.
6-42
To Next Page
Loading...
