Compass Operation
Mirror Operation
The right side of the switch located at the bottom of the
mirror turns the electrochromic mirror on and off. The
AUTO
LED
will
come
on
when the electrochromic
mirror is turned on. To turn the mirror on, press
and hold the MIRROR button for three seconds. The
mirror
will
darken and remain dark
until
the button is
released.
To
turn the mirror off, press and release the
MIRROR button.
Press the COMP switch once briefly to
turn
the
compass
on or off.
When the ignition and the compass feature are
on,
the
compass will show two character boxes for
approximately two seconds. After two seconds, the
mirror will display the compass heading.
When cleaning the mirror, use a paper towel or similar
material dampened with glass cleaner.
Do
not spray
liquid cleaner to enter the mirror housing.
L.
elass cleaner directly
on
the mirror as that may cause the
Compass Calibration
If,
after two seconds, the display does not show a
compass heading
(-.N’’
for North, for example), there
may be
a strong magnetic field interfering
with
the
compass. Such interference may be c.aused
by
a
magnetic antenna mount, magnetic note pad holder or
a
similar magnetic item.
If
the letter
“C”
should ever
appear
in
the compass window, the mirror may
need calibration.
2-45
To Next Page
Loading...
