Radiator Pressure Cap
The radiator pressure cap must be tightly installed
with
the arrows on the cap lined
up
with
the overflow tube
on
the radiator filler neck.
NOTICE:
Your radiator cap
is
a
15
psi
(105
kPa)
pressure-type cap and must be tightly installed to
prevent coolant
loss
and possible engine damage
from overheating. Be sure the arrows on the cap
line up with the overflow tube on the radiator
filler neck.
Thermostat
Engine coolant temperature
is
controlled
by
a
thermostat
in
the engine coolant system. The thermostat stops
the
flow
of coolant through the radiator
until
the coolant
reaches a preset temperature.
When you replace your thermostat, an
AC@
thermostat
is recommended.
6-29
To Next Page
Loading...
