GMC 1998 Yukon - Installing a Garage Door Opener

Installing a Garage Door Opener
If you have a garage door opener, the front overhead
compartment can be used to conveniently store the opener.
I. To install the garage door opener, first open the
compartment door by pressing
the release
button forward.
2. Peel the protective
backing from the
hook
and loop patch. Press it
firmly to the back
of
your garage door opener,
as close to the center
of
the opener as possible.
I
3. Center the garage door opener activation button over
the console door button, and press the opener firmly
into place.
The
pegs inside the compartment door are used to
make sure the button on the compartment door will
contact the control button on the garage door opener.
4. Add one peg at a time
until the PUSH button on
the closed compartment
door operates the garage
door opener.
2-53