Composite
Headlamps
I.
Remove the two hex head pins at the top
of
the
2.
Pull the headlamp lens assembly
out.
radiator support, as shown.
3.
Unplug the
electrical connector.
4.
Turn the bulb to the left and remove it.
5.
Put the new
bulb
into the lens
assembly
and
turn
it
to
the right
until
it
is
tight.
6.
Plug
in
the electrical connector.
7.
Put the headlamp lens assembly back into the
vehicle. Install and tighten the two hex head pins.
6-38
To Next Page
Loading...
