EasyManua.ls Logo

GMC 1998 Yukon - Starter Switch Check; Brake-Transmission Shift Interlock (BTSI) Check

GMC 1998 Yukon
444 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Starter Switch Check
A
CAUT’^”J:
move suddenly.
If
it
does, you or others could be
injured.
Follow
the steps below.
Brake-Transmission Shi^
.ock
(nmSI)
Check
‘--A---’
-
A
CAUT’ON:
When you are doing this check, the vehicle could
move suddenly.
If
it does, you or others could be
injured.
Follow
----1
the steps below.
1.
2.
3.
Before you start, be sure you have enough room
around the vehicle.
Firmly apply both
the
parking brake (see “Parking
Brake”
in
the Index if necessary) and the
regular brake.
NOTE:
Do
not use the accelerator pedal, and be
ready to turn off the engine immediately
if
it starts.
Try to start the engine in each gear. The starter
should work only in PARK
(P)
or NEUTRAL (N).
If
the starter works in any other position, your
vehicle needs service.
1.
2.
3.
Before you start, be sure you have enough
room around the vehicle.
It
should be parked
on
a
level surface.
Firmly apply the parking brake (see “Parking Brake“
in
the Index
if
necessary).
NOTE: Be ready to apply the regular brake
immediately
if
the
vehicle begins to move.
With the engine off, turn the key
to
the
RUN
position,
but
don’t start the engine. Without applying the regular
brake,
try
to move the shift lever out of PARK
(P)
with
normal effort.
If
the shift lever moves out of
PARK (P). your vehicle’s
BTSI
needs service.
7-40

Table of Contents

Related product manuals