Remote Compact
Disc
Player
(If
Equipped)
If
you have this option, you can play one compact disc
(CD) at a time.
To
load
a
CD into the player. hold the disc
with
the label
side up and insert
it
carefully into the player
(approximately halfway). The disc
will
automatically
be
pulled
into
the player.
If
the radio
is
off and the ignition
is
on
when
a
CD is inserted, the radio
will
turn on and
begin playing the
CD.
It
is possible to load and
unload
CDs
with
the ignition off.
To
load
a
disc
with
the
ignition off, press the EJECT button on the remote
player and then insert the disc.
To
remove the disc. press
the EJECT button and remove the disc from the player.
A
disc that has been ejected
but
is still sitting
in
the
remote CD player
will
be pulled back into the player
after approximately
30
seconds. This protects the disc
and player from damage. The disc
will
not start playing.
To remove the disc. press the EJECT button and remove
the disc from the player.
All of the compact disc functions are controlled by the
radio buttons except for
EJECT.
When
a
disc
is
in
the
player,
a
CD
symbol
will appear
on
the display. When
a
disc
is
playing, the letters CD
will
appear next to the
CD
symbol
in
the bottom left corner. The track number will
also
be displayed.
If
the disc comes back out
and
ERR
appears
on
the
display,
it
could be that:
0
The disc
is
upside down.
0
It
is dirty. scratched or wet.
0
There’s too much moisture
in
the air. (Wait about an
hour and try again.)
You are driving
on
a very rough road.
Please contact your dealership
if
any error recurs or
cannot be corrected.
PREV
(1):
Press this button to
go
back to the start
of the current track
if
mot-e than eight seconds have
played. Press
PREV
again to
go
to the previous track on
the disc.
NEXT
(3):
Press this button to advance to the next track
on the disc.
3-23
To Next Page
Loading...
