Entry to the Rear Seat (Suburban Second Seat)
The right side of the rear 60140 split folding bench seat
has an easy entry feature. That makes
it
easy to get
in
and out of the third seat,
if
you have one.
To
operate the seat, move the lever at the side of the
seat down.
Tilt
the seatback toward the front of the vehicle by
pulling the top of the seatback forward.
When you do, the seat bottom
will
release.
Just
pull
the
seat forward
until
it
stops.
To release the easy entry second seat, lift up on the top
of
the release lever with your foot. Push the top of
the
seatback forward and
tilt
it toward the front
of
the vehicle.
To
return the sent to its regular position, return the
seatback to its upright position, then push the whole seat
rearward
until
it latches.
After returning the seat to its regular position, try to
move the seat
with
your body, to make sure the seat
is
locked into place.
There
is
a foot-operated
release lever for rear seat
passengers to use when
getting out
of
the third seat.
A
seat that isn’t locked into place properly can
move around in a collision or sudden stop. People
in the vehicle could be injured. Be sure to lock
the seat into place properly when installing it.
1-14
To Next Page
Loading...
