Heater and Air Conditioning Control
System
(If
Equipped)
Fan Knob
The knob
011
the left side of the heating system control
panel controls the
fa1
speed. The knob has four speed
positions.
To
increase airflow, move the knob toward
HI.
To
decrease airflow, move
it
toward
LO.
To turn the
fan off, move the knob to
OFF.
If
you
have the air
conditioner on, moving the fan knob to
OFF also turns
off the
A/C
compressor.
While driving
with
the fan knob
in
OFF,
ram airflow
will
vent to the floor outlets. The mode knob
will
not
redirect ram airflow to other selected outlet positions.
This
is
a normal operation for the
OFF
position.
Temperature Knob
The middle knob on the control panel lets you select
the
relative temperature
of
the air flowing into the passenger
area
of
your vehicle. This knob
will
allow you to adjust
the relative air temperature independently of the firnction
knob setting. Move the knob to the right toward the red
area for warmer air. Move the knob to the left toward the
blue area
for
cooler air.
Mode Knob
The right knob
on
the control panel allows you to
choose the direction of air delivery. The control knob
can be placed
in
any position between
any
two mode
settings to blend the flow
of
air.
/J
VENT This setting directs air through the
instrument panel outlets.
+'
VENT/HEAT: Use
this
setting
to
divide airflow
between the floor outlets and instrument panel outlets.
+fl0
HEATER: This setting directs air through the
floor outlets.
+'
DEFOG: This setting directs air to the heater
outlets and toward the windshield.
-bo
+e
w.
DEFROST
This setting directs air toward
the windshield.
3-3
To Next Page
Loading...
