Move the seatback release
lever, at the right rear of the
seat, toward the center of
the vehicle.
Then, fold the seatback forward into the seat cusnlon.
To
unlatch the seat from the
floor, pull up on the center
release handle at the rear of
the seat and lift the rear seat
Replacing the Rear Seat
To put the seat back in, hold the seat sideways and put it
into the vehicle. Turn the seat to the forward position
and set it down, with the latches at the bottom
of
the seat
over the
hooks
in the floor. Pull up on the center release
handle and let the seat drop into place. Release the
handle to let the seat latch close and make sure it
locks
into place. Then, move the seatback release lever at the
right rear
of
the seat toward the center of the vehicle and
raise the seatback.
After returning the seatback to the upright position, push
the seatback forward to make sure it is locked into place.
Then, return the outside passenger position safety belts
to the seat frame buckles,
so
they will be available
for
rear seat passengers to use.
Turn the seat sideways and take it out
of
the vehicle.
1-16
To Next Page
Loading...
