D
&Door
Utility
Models
A. Hoist Assembly
B.
Hoist Shaft
C.
Ratchet
D.
Jack Handle
E. Retainer
E
Vdve Stern, Pointed Down
G
.
Spare Tire
Follow these instructions to lower
the spare tire:
1.
2.
3.
4.
One side of the ratchet has
an
UP
marking. The other
side has a
DOWN
marking. Assemble
the
ratchet to
the hook near the end
of
the jack handle (as
illustrated)
with
the
DOWN
marking facing you.
Insert the other end through the hole
in
the rear
bumper and into the hoist shaft.
Turn the ratchet to lower the spare tire
to
the ground.
Continue to turn
the
ratchet
until
the spare tire can be
pulled out from under the vehicle.
When the tire has been lowered,
tilt
the retainer
ar
the end of the cable
so
it
can be pulled up through
the wheel opening.
Put the spare tire near the flat tire.
If
your two-door utility
model has
a
jack cover, turn
the wing
nut
to the
left
and
take the cover off.
5-24
To Next Page
Loading...
