GME CP30 - Page 81

77
CP30 INSTRUCTION MANUAL
Channel Menu
1. Press the Channel Menu key to enter the Receive-only Channel
Editing menu. Here you can edit receive-only channels or view the
details of CB and Private channels.
2. Rotate the Channel Selector knob or the keys to navigate the
Channel menu options.
3. Press
MENU
F
to select an option.
For full Channel Menu editing instructions, please see the Private and Receive-only
Channels section of this User Manual.
Duplex Toggle
1. Select the desired repeater channel (CB1-8, CB31-38 or a duplex
private channel).
2. Press the programmed Duplex Toggle key to toggle Duplex ON or OFF
on the selected channel. The icon indicates when Duplex is On.
NOTE: Duplex cannot be enabled on Simplex channels.
Duplex Menu
1. Select the desired repeater channel (CB1-8, CB31-38 or a duplex
private channel).
2. Press the programmed Duplex Menu key to access the Duplex menu.
3. Rotate the Channel Selector knob or press the keys to select Duplex ON
or OFF on the selected channel. The icon indicates when Duplex is On.
NOTE: Duplex cannot be enabled on Simplex channels.
4. Press the
MENU
F
key to exit or wait a few seconds for the menu to time-out.
Dynamic Volume Control Toggle
Press the programmed Dynamic Volume Control Toggle key to toggle the
Dynamic Volume Control ON or OFF.
Dynamic Volume Control Menu
1. Press the programmed Dynamic Volume Control Menu key to
access the Dynamic Volume Control menu.
2. Rotate the Channel Selector knob or press the keys to select ON or OFF.
3. Press the
MENU
F
key to exit or wait a few seconds for the menu to time-out.