GME CP30 - Page 90

CP30 INSTRUCTION MANUAL
86
SCALPH ON or SCALPH OFF will be displayed.
• SCALPH ON: The SelCall contact’s alpha name will be displayed.
• SCALPH OFF: The SelCall contact’s numeric Ident will be displayed.
Silent Squelch Tail (SST) Toggle
The Silent Squelch Tail function removes the short burst of noise that is heard in
the speaker just before the Squelch closes at the end of a transmission.
Press the programmed Silent Squelch Tail Toggle key to toggle the Silent
Squelch Tail function ON or OFF.
SST ON or SST OFF will be displayed.
Silent Squelch Tail (SST) Menu
The Silent Squelch Tail function removes the short burst of noise that is heard in
the speaker just before the Squelch closes at the end of a transmission.
1. Press the programmed Silent Squelch Tail Menu key to access the
Silent Squelch Tail menu.
2. Rotate the Channel Selector knob or press the keys to switch the
Silent Squelch Tail setting ON or OFF. SST ON or SST OFF will be
displayed.
3. Press the
MENU
F
key to exit or wait a few seconds for the menu to time-out.
Squelch Toggle
Press the programmed Squelch Toggle key to toggle the squelch Open or Closed.
• When the squelch is open, SQLCH OPn will appear briey and the
receiver noise will be heard in the speaker.
• When the squelch is closed, SQLCH CLS will appear briey and the
receiver will remain quiet.
Squelch Menu
1. Press the programmed Squelch Menu key to enter the Squelch menu.
2. Rotate the Channel Selector knob or press the keys to Open or Close
the Squelch.
• When the squelch is open, SQLCH OPn will appear and the
receiver noise will be heard in the speaker.
• When the squelch is closed, SQLCH CLS will appear and the
receiver will remain quiet.
3. Press the
MENU
F
key to exit or wait a few seconds for the menu to time-out.