7–5
³118417
Beep on BEL Command – The scanner beeps
when it receives a BEL character from the host. If
a number is sent within 200 msecs before the
BEL character, the scanner will beep that
number of times.
³118407
* Ignore BEL Command
³116913
Enable Light Pen Toggle During Beep –
The scanner beeps and toggles the light pen
data line on a successful decode. This drives a
good read indicator.
³116903
* Disable Light Pen Toggle During Beep
³124711
Enable Pass-Through
³124701
Disable Pass-Through
³125011
Beep with Pass-Through Data
³125001
* No Beep with Pass-Through Data
³125010
Enable Record Count Capture
³125000
* No Record Count Capture
³998052
Transmit Record Counts
To Next Page
