Godex GS220 - User Configurable Suffixes, All Data

8–9
User Configurable Suffixes, All Data
Note: Scan the Enter/Exit Configuration mode code before trying to set this
feature. Refer to Multi-Code Method on page 1–1.
³904500
~ Configurable Suffix Character #1 – A suffix ID
can be added and assigned for data
transmission. Use this code with a 3 code byte
sequence, on page 16–1, which represents the
desired character.
³904600
~ Configurable Suffix Character #2 – Assigns a
second configurable suffix character.
³904700
~ Configurable Suffix Character #3 – Assigns a
third configurable suffix character.
³904800
~ Configurable Suffix Character #4 – Assigns a
fourth configurable suffix character.
³904900
~ Configurable Suffix Character #5 – Assigns a
fifth configurable suffix character.
³905000
~ Configurable Suffix Character #6 – Assigns a
sixth configurable suffix character.
³905100
~ Configurable Suffix Character #7 – Assigns a
seventh configurable suffix character.
³905200
~ Configured Suffix Character #8 – Assigns an
eighth configurable suffix character.
³905300
~ Configurable Suffix Character #9 – Assigns a
ninth configurable suffix character.
³905400
~ Configurable Suffix Character #10 – Assigns a
tenth configurable suffix character.
³999984
* Clear All User Configurable Suffixes