7–6
Data Transmission Delays
Use these codes to select the amount of delay between sending data
characters from the scanner to the host. This helps prevent the scanner from
overflowing host-input buffers.
³818810
* 1 msec Intercharacter Delay
³8188100
10 msec Intercharacter Delay
³8188250
25 msec Intercharacter Delay
³918800
~
ariable msec Intercharacter Delay – Scan this
bar code and a sequence of code bytes on page
16–1 to set the delay between characters sent to
the host system (range from 1 to 255 msecs.).
³818800
No Intercharacter Delay
³919300
~ Variable Inter-Record Delay
³119317
Turn Off Laser During Inter-Record Delay
³119307
* Leave Laser On During Inter-Record Delay
To Next Page
Loading...
