Godex GS220 - Standard Prefix Characters

8–4
Standard Prefix Characters
³116615
Enable STX Prefix – The scanner will transmit a
Start of TeXt (ASCII 02H) before each bar code.
³116605
* Disable STX Prefix
³105513
Enable Rochford-Thomson Mode
³105503
* Disable Rochford-Thomson Mode
³107915
Enable AIM ID Characters
³107905
* Disable AIM ID Characters
³116617
Enable UPC Prefix ID – A prefix will be
transmited before any UPC/EAN code. The
prefixes are A (UPC-A), E0 (UPC-E), F (EAN-13),
and FF (EAN-8).
³116607
* Disable UPC Prefix ID.
³107911
Enable NCR Prefix ID – A prefix will be
transmitted before the following code types. The
prefixes are as follows: A (UPC-A), E0 (UPC-E),
FF (EAN-8), F (EAN 13), B1 (Code 39) B2 (ITF),
B3 (Code 128 and other codes).
³107901
* Disable NCR Prefix ID
³941500
Enable NCR Prefix Character
³107917
Enable Nixdorf ID Characters – This option
transmits code identities before each bar code
for many Siemen/Nixdorf registers.
³107907
* Disable Nixdorf ID Characters