11–4
Special Keyboard Features
³116311
Transmit Make Code Only – Not available on
all models.
³116301
* Transmit Make/Break Code – Not available on
all models.
³116310
* Transmit FOH Break Code – The scanner will
transmit the FOH in the break-code sequence.
³116300
Do Not Transmit FOH Break Code
³116315
Transmit Cleanup Bit – Use for certain NEC
computers.
³116305
* Do Not Transmit Cleanup Bit
³116217
Enable Alt-Mode – See Enable ALT-Mode
(Normal) for description.
³116207
* Disable Alt-Mode – Caution: If host software
application uses the right Alt key as a “Hot” key,
Alt-mode must be disabled.
† These settings only apply if the Alt-Mode (shown above) is enabled.
³116706
* Enable Alt-Mode (Normal)
†
The scanner will duplicate the following keyboard
sequence; Hold down the Alt key and Type the
three digit decimal number that corresponds to
the appropriate character.
³116716
Enable Alt-Mode (Advanced)
†
The scanner will duplicate the following keyboard
sequence; Hold down the Alt key and Type the
four digit decimal number that corresponds to the
appropriate character.