7–9
³115916
Transmit Scanner ID byte with receipt of an
“i” (69H) via RS232 – The ID byte is transmitted
as 3 bytes (i.e. 0, 0, 1).
³115906
* Don’t Transmit Scanner ID byte with receipt
of an “i” (69H) via RS232
³118111
Transmit NO READ if DC2 Activated
³118101
* Do Not Transmit NO READ if DC2 Activated
³118311
No Green LED During NO READ Transmit
³118301
* Green LED During NO READ Transmit
³999969
Transmit Serial Number
³118213
Enable Motor On/Off Commands
³118203
* Disable Motor On/Off Commands
³125016
Disable RS232 Receive
³125006
Normal RS232 Receive
³125013
Enable Banco Control Mode
³125003
Disable Banco Control Mode
To Next Page
Loading...
