Preview
Audio
Video quality
Med
Low
High
Password
Current 1 to 15 numbers
1 to 15 numbers
1 to 15 numbers
New
Confirm
ID
Name Home
UID
UID
PIN to unlock
Password
Monitor settings
ID
Password
Push to talk
Preview
Wi Fi-
Notification
FW Versión
Time & Date synchronisation
Delete
SOUL S5110/ART 7W VIDEO DOOR ENTRY SYSTEM KIT
27
Advanced settings of a registered monitor
Note: This password is saved on the monitor. If another phone had access to this monitor, you need to also
make changes to the basic settings of that monitor.
The app has hands-free communication with the door panel. If you prefer, you can activate the 'Push to talk'
function by marking the box.
Change the connection password to the monitor. It is the same password used to unlock the door if the function
has been activated. Once the password has been changed, save the changes using icon . To exit without
saving changes, use icon .
Push to talk.
Preview.
Set the quality of the default video signal (number of images per second) according to the type of data
connection. It also defines whether the audio from the door panel to the phone is automatically activated upon
receipt of the call, or whether it is necessary to press the pickup icon.
To access the advanced settings of a monitor registered in the app, press the preview screen of that monitor and
then icon in the top right part of the screen. Even if the monitor is not connected at that time, you can adjust
the settings.
To make changes to the monitor settings, the receipt of notifications must be turned off. In addition to the monitor
settings, you can activate the password request function to unlock the door. This password is the same as
that described on p. 25 and can be changed in advanced settings. This password will be requested to
deactivate the function again.
Use icon to change the settings. Once completed, save the settings using icon . To exit without saving
changes, use icon .
ID.
Password.
G2Call APP
To Next Page
Loading...
Need help?
General
