Google Pixel 6 Pro - Soften Glue; Clamp Fixture

Google 2021 | Confidential and Proprietary | Do not distribute 106
01. Soften glue
02. Clamp fixture
●
Place the device on a Heat plate set to 158 /70 for 10 ℉ ℃
mins to soften the Battery adhesive.
●
Place the Universal disassembly fixture on the desk and
fasten down with the clamp.
●
Align the Table C-Clamp with the fixture using the dotted line.
And make sure it’s as tight as possible.
Battery - method 1
Ensure the Rear camera area is not touching the Heat plate.
The table must to be quite bulky.
Bottom spe
aker
MicLogic bo
ard
BatteryFront ca
mera
Top
Speaker
Rear ca
mera
Upper mid-f
rame
mmWaveMid-frameGraphic sh
eet
Display