Google Pixel 6 Pro - Tilt the FCAM

Google 2021 | Confidential and Proprietary | Do not distribute 52
Display
20. Remove liner
21. Tilt the FCAM
Bottom spe
aker
MicLogic bo
ard
BatteryFront ca
mera
Top
Speaker
Rear ca
mera
Upper mid-f
rame
mmWaveMid-frameGraphic sh
eet
Display
●
Use the Universal adsorption-bulb to lift up the Display
module and remove both the Front Cam Film and Front
Cam Cap.
●
Use ESD tweezers to grab the liner and carefully pull it away.
Part: G806-06298-01 (Front Cam Film)
G852-02355-01 (Front Cam Cap)
Fig 1
OK
Fig 2
NG
●
Tilt few for the FCAM. To let it a little higher than trim psa
area.
FCAM must tilt few as Fig 1. to ensure concentrativity.
Fig 2, almost flat, NG