Google Pixel 6 Pro - Separate Top;Right;Left Edge; Separate Bottom Edge

Google 2021 | Confidential and Proprietary | Do not distribute 37
09. Separate Top/Right/Left edge
10. Separate bottom edge
●
Insert an ESD pick (3.5mm) into the gap to
separate the top side.
●
Then slide around the right side and left side.
●
Separate the bottom edge with the ESD pick(3.5mm)
inserted at an approximately 75 degree.
●
º angle and slide horizontally, as shown above.
Display
Bottom edge
Do not insert the pick horizontally, insert at 75º and keep the
ESD pick at that angle.
Approximately
75 degree
Top
edge
Left
Side
Right
Side
Insert and keep pulling the gap horizontally.
Bottom spe
aker
MicLogic bo
ard
BatteryFront ca
mera
Top
Speaker
Rear ca
mera
Upper mid-f
rame
mmWaveMid-frameGraphic sh
eet
Display
2mm
2mm
3.5mm
2mm
2mm
3.5mm