Troubleshooting
Mic2
Symptom
Potential
Root Cause
Procedure
T013: Mic 2 - no sound
T014: Mic 2 - low sound
T015: Mic 2 - distorted sound
Connectivity
issue
●
Check if connectivity between Flam connector
and Logic board are normal.
●
If they are not fully buckled, re-assemble and
then retest.
Connectors Location
Component issue
●
Use a good Enclosure and Logic board to
cross check with original ones.
●
Replace the defective component.
Disassembly
● Logic board
●
Enclosure