Google Pixel 6 Pro - Install UDFPS Calibration; Attach Display Cowling

Google 2021 | Confidential and Proprietary | Do not distribute 51
Display
18. Install UDFPS Calibration
19. Attach display cowling
●
Reboot device into the Fastboot mode
●
Connect the device with USB-C cable to the computer, and
visit pixelrepair.withgoogle.com to download the UDFPS
calibration software
●
Detailed SOP
This step is only required if the display or the mainboard has been
replaced
Bottom spe
aker
MicLogic bo
ard
BatteryFront ca
mera
Top
Speaker
Rear ca
mera
Upper mid-f
rame
mmWaveMid-frameGraphic sh
eet
Display
●
Attach a new Display cowling over the connector.
●
Tighten the one screw with a Torx Plus 3IP screwdriver.
Torque force ： 0.7 ± 0.03kgf-cm
Part: G730-05725-01 (Display cowling)
Part: G250-06026-00 (Screw)
Be careful not to puncture the battery when tightening the screw.