Display
22. Fix down display
23. Place in holder
●
Align the Display module on the Enclosure vertically.
●
Take the device out from the Holder and press around the
display bezel with both hands.
Bottom spe
aker
MicLogic bo
ard
BatteryFront ca
mera
Top
Speaker
Rear ca
mera
Upper mid-f
rame
mmWaveMid-frameGraphic sh
eet
Display
Press the top side middle first, and then follow on 2 long sides and
bottom side.
●
Place the device back in the R4 Enclosure holder and place
the Press cover on top.