Display replacement
Heat Plate
Universal disassembly fixture
Ionizing air fan
R4-Assy-Enclosure and CG Press Cover & Sponge Align
R4-Assy-Enclosure Holder & Graphite Align
R4-Assy-Enclosure PSA Align & Press Cover
Universal press fixture
Universal adsorption-bulb
Torx Plus 3IP screwdriver
Universal Fish line
ESD tweezers
ESD stick
ESD pick
3M UPUV Primer
R4-Dssy-Cleaning Cover-CG
Deglue Machine
Tools
Before
beginning a
repair, be sure
to power off
the device.
Prerequisites
Display
The Display module is connected to the Logic board, so be careful with the flex when opening the device up.
Caution!
Use safety gloves to handle damaged displays as some splinter during removal. Apply protective film to broken glass before removal.