Google Pixel 6 Pro - Screw Cover; Remove Screws

Google 2021 | Confidential and Proprietary | Do not distribute 65
01. Screw cover
02. Remove screws
●
Place the R4 Screw cover on the R4-Assy-Enclosure
Holder & Graphite Align. The 3 alignment pins are to avoid
removing the wrong screws.
●
Remove 7 Mid-frame Screws with a Torx Plus 3IP
screwdriver.
●
Then remove the R4 Screw cover.
Part: G250-05753-00 (Screw)
Mid-frame
Do not reuse the part
Bottom spe
aker
MicLogic bo
ard
BatteryFront ca
mera
Top
Speaker
Rear ca
mera
Upper mid-f
rame
mmWaveMid-frameGraphic sh
eet
Display