Google Pixel 6 Pro - Soften the Adhesive; Where Snaps Are

Google 2021 | Confidential and Proprietary | Do not distribute 34
●
Place the device on a Heat plate set to 122 /50 ℉ ℃ for 5 mins
to soften the adhesive.
03. Soften the adhesive
●
Before removing the Display module, be aware that there are
six snaps underneath.
●
Avoid damaging the snaps during the disassembly process.
Display
04. Where snaps are
Display face to the heat plate.
Bottom spe
aker
MicLogic bo
ard
BatteryFront ca
mera
Top
Speaker
Rear ca
mera
Upper mid-f
rame
mmWaveMid-frameGraphic sh
eet
Display