Google Pixel 6 Pro - Apply Primer; Remove Liner

Google 2021 | Confidential and Proprietary | Do not distribute 43
Display
02. Apply primer
03. Remove liner
●
Apply 3M UPUV Primer around the edge of the device.
●
Use an Ionizing air fan to blow over the device to prepare the
Primer for the adhesive.
●
Slowly remove the transparent liner from the adhesive.
Part: G806-05452-03 (Adhesive)
Once Primer has been applied, complete assembly in 25 mins.
Do not touch the adhesive. If it gets dirty, change for another one.
transparent liner
Bottom spe
aker
MicLogic bo
ard
BatteryFront ca
mera
Top
Speaker
Rear ca
mera
Upper mid-f
rame
mmWaveMid-frameGraphic sh
eet
Display