Google Pixel 6 Pro - Page 113

Google 2021 | Confidential and Proprietary | Do not distribute 113
Battery
01. Clean enclosure
02. Insert battery
●
Before installation, remove any debris/loose screws from the
Enclosure. Ensure Battery cosmetic checks are completed.
●
Tear off the two battery liners.
●
Apply 3M AP111 Primer to the Battery adhesive area as
shown.
●
Place 0.9mm Feeler gauge against the wall.
Once Primer has been applied, complete assembly in 25 mins.
Feeler gauge align as blue line.(X direction - Blue line)
Bottom spe
aker
MicLogic bo
ard
BatteryFront ca
mera
Top
Speaker
Rear ca
mera
Upper mid-f
rame
mmWaveMid-frameGraphic sh
eet
Display