Google Pixel 6 Pro - Page 127

Google 2021 | Confidential and Proprietary | Do not distribute 127
Logic board
09. Screw in logic board
10. Attach connectors
●
Place the R4 Screw cover on the R4 Enclosure holder.
●
Tighten the 5 screws with a Torx Plus (3IP) screwdriver, as
shown. Torque force ： 1.6 ± 0.03kgf-cm
●
Remove the R4 Screw cover.
Part: G250-05752-00 (Screw)
●
Attach the 2 connectors from the Enclosure to the Logic board.
UWB flex / FLAM flex
Bottom spe
aker
MicLogic bo
ard
BatteryFront ca
mera
Top
Speaker
Rear ca
mera
Upper mid-f
rame
mmWaveMid-frameGraphic sh
eet
Display