Google Pixel 6 Pro - Page 75

Google 2021 | Confidential and Proprietary | Do not distribute 75
03. Remove Screws
04. Remove bracket
●
Place the R4 Screw cover on the R4 Enclosure holder.
●
Remove the mmWave bracket screw with a Torx Plus 3IP
screwdriver, then remove the R4 Screw cover.
Part: G250-05753-00 (Screw)
●
Remove the bracket with an ESD stick.
Part: G730-05758-01 (bracket mmWave)
Part: G730-05758-03 (bracket sub-6)
mmWave
Do not reuse the part
Bottom spe
aker
MicLogic bo
ard
BatteryFront ca
mera
Top
Speaker
Rear ca
mera
Upper mid-f
rame
mmWaveMid-frameGraphic sh
eet
Display