Google Pixel 6 Pro - Page 83

Google 2021 | Confidential and Proprietary | Do not distribute 83
01. Remove screws
02. Remove upper mid-frame
●
Place the R4 Screw cover on the R4 Enclosure holder.
●
Remove the 2 screws of the Upper mid-frame with a Torx
Plus 3IP screwdriver, remove the R4 Screw cover.
Part: G250-05753-00 (Screw)
●
Remove the Upper mid-frame with ESD tweezers from the
right side, as shown.
Part: G730-05950-01 (Upper mid-frame)
Upper mid-frame
Do not reuse the part
Bottom spe
aker
MicLogic bo
ard
BatteryFront ca
mera
Top
Speaker
Rear ca
mera
Upper mid-f
rame
mmWaveMid-frameGraphic sh
eet
Display