Google Pixel 6 Pro - Page 88

Google 2021 | Confidential and Proprietary | Do not distribute 88
01. Remove screws
02. Disconnect camera
Rear camera
●
Place the R4 Screw cover on the R4 Enclosure holder.
●
Remove the Rear camera screw with a Torx Plus 3IP
screwdriver, remove the Screw cover.
Part: G250-05752-00 (Screw)
●
Loosen 3 Rear camera connectors and disconnect from the
Logic board with a Universal Fish line.
Using the Universal Fish line avoids damage the components.
Do not reuse the part
Bottom spe
aker
MicLogic bo
ard
BatteryFront ca
mera
Top
Speaker
Rear ca
mera
Upper mid-f
rame
mmWaveMid-frameGraphic sh
eet
Display