Google Pixel 6 Pro - Page 92

Google 2021 | Confidential and Proprietary | Do not distribute 92
Rear camera
03. Attach rear camera
04. Fasten rear camera
●
Place the Rear camera into position, keeping it aligned with
the lenses in the enclosure.
●
Attach the 3 connectors to the Logic board.
Part: G949-00227-01 (Rear camera)
●
Place the R4 Screw cover on the R4 Enclosure holder.
●
Tighten Rear camera screw with a Torx Plus 3IP screwdriver,
take out the R4 Screw Cover.
Torque force ： 1.6 ± 0.03kgf-cm
Part: G250-05752-00 (Screw)
Bottom spe
aker
MicLogic bo
ard
BatteryFront ca
mera
Top
Speaker
Rear ca
mera
Upper mid-f
rame
mmWaveMid-frameGraphic sh
eet
Display