Google Pixel 6 Pro - Page 98

Google 2021 | Confidential and Proprietary | Do not distribute 98
Top speaker
04. Fasten top speaker
●
Place the R4 Screw cover on the R4 Enclosure holder.
●
Tighten the 2 Top speaker screws with a Torx Plus 3IP
screwdriver, then remove the R4 Screw cover.
Torque force ： 1.6 ± 0.03kgf-cm
Part: G250-05752-00 (Screw)
03. Insert top speaker
●
Insert it into the Top speaker slot on the Enclosure at an angle
of about 10°, making sure to fit it completely.
●
Hand press it accordingly
Part: G863-00396-01 (Top speaker)
Bottom spe
aker
MicLogic bo
ard
BatteryFront ca
mera
Top
Speaker
Rear ca
mera
Upper mid-f
rame
mmWaveMid-frameGraphic sh
eet
Display