Gorgy Timing LEDI Series - Date; Time Alternation Option (Only LEDI); Temperature Option

72
MDE-LEDI-1099V3.4
► Specic version with indicator for absence of sync:
Same protocol as the table above, but when the clock has not received the
right sync code yet, or when the sync signal disappears during more than
24hours, the eld “DAY” indicates 3 symbols « ### ».
The 2nd part of 12 extra octets is not generated in this version.
2.2.3. Date / time alternation option (only LEDI)
► The clock can be set to display time and date alternating.
► The display period for time or date is congurable from 0 to 15 seconds (0 to do not
display)
► Date/ time change is also available on double face (LEDI REVERSO)
2.2.4. Temperature option
► The clock can be set to display time and date alternating.
► The display period for time or date is congurable from 0 to 15 seconds (0 to do not
display)
► Offset setting available for temperature
► Measurement range -15°C ► +65°C accuracy +/-0.4°C
► Air and water temperature available by probe
► The clock can display several zones of temperature through a wire probe or/and
wireless (only LEDI POOL)
► Wired version :
Temperature through probe PT1000 delivered with 4m cable.
► Wireless version:
PT1000 + 4m cable delivered with a radio transmitter (869 Mhz)
► Transmitter powered by 230VAC for a maximum distance of 1000m of transmission
(the distance can be reduced by impediments between transmitter and sensors)