Need help?Do you have a question about the Gorgy Timing LEDI Network IN and is the answer not in the manual?
General| Display | LED |
|---|---|
| Connection | Ethernet |
| Display Size | 4 digits |
| Synchronization | NTP |
| Digit Height | 5 cm |
| Enclosure | Aluminum |
| Power | PoE (Power over Ethernet) |
| Type | Network Clock |
| Function | Time display |
| Protocol | NTP |
| Power Supply | PoE |
Provides essential information for setting up the LEDI Network IN, with references to further details.
Guides through network parameter configuration, including default settings and changing network parameters.
Explains the automatic IP address acquisition via DHCP or AutoIP, and default identifiers.
Details the configuration of various output card types and their default UTC time output.
Explains how to add and configure an NTP server output card for local network synchronization.
Introduces the web interface for configuring and supervising the LEDI Network IN, listing its key features.
Details the main screen of the web interface and the function of its primary buttons for access to various panels.
Shows the primary web interface screen and the function of its four main navigation buttons (Standard, SNMP, NTP, Output).
Details the web interface for the NTP server output card, covering network, SNMP, and NTP setup.
Details the SNMP v1 interface for the NTP server card, including its MIB structure and parameters.
Provides troubleshooting steps for when the device is not detected by GTNetManager, covering cable, VLAN, and IP address issues.
Offers solutions for inability to open the web configuration page, checking reachability, Java settings, and browser proxy configurations.
Guides on troubleshooting missing outputs in the web configuration, suggesting page refresh, Telnet reset, and checking physical connections.
Explains the 'Commuting' mode issue, advising to check NTP server reachability and correct IP addresses in the NTP panel.
Provides a step-by-step guide for replacing the internal battery of the device, including tools and battery checking.
Details the process of obtaining and updating the device firmware, including file naming conventions and tool usage.
To Next Page